“Tempo” make Stability Chamber are designed as per ICH guidelines and are manufactured to comply requirements in the industries. Stability Testing is an integral part of formulation development. It helps to generate information, which permits well‐considered proposals to be made for the shelf life of drug substances and products and recommended storage condition. Stability data are required to be submitted as a part of the dossier submitted to the regulatory agencies for licensing approvals.

Standard Model

Inner Chamber made of Stainless Steel (S.S.304) mirror finish & Outer G.I. duly powder coated.

GMP Model

Inner Chamber made of Stainless Steel (S.S.316) mirror finish & Outer S.S.304 matt finish.

Construction

“Tempo” make Stability Chamber are made of double walled construction with backside triple walled. Full view inner acrylic door & front door with gasket & lock. Motorized blower is fitted on the back side for uniform temperature & humidity. 3” thick PUF insulation to ensure stable temperature with humidity. Mounted on caster wheels for easy movement.

50 mm validation port hole with silicon rubber seal to insert sensors for validation.  Full view observation Acrylic door with gasket to observe sample inside the chamber.

Technical Specification

Controlling System

Two separate imported microprocessor based auto tune PID controller with CE mark & dual display of set value & process value for temperature & humidity with direct %RH.

Air Circulation

Motorized blower at back side of the chamber develops unique air flow system which ensures max. uniform temperature & humidity condition inside the chamber.

Heating System

High quality U shape S.S. tubular heater are used for better heating.

Humidity System

Steam injection system (Non condensing type) & reservoir tank with water level arrangement with indicator.

Refrigeration System

CFC Free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (Eco Friendly) refrigerant with time delay to safe guard compressor system.

  • Temperature Range           :       20°C to 60°C
  • Temperature Accuracy      :       ± 0.2°C
  • Temperature Uniformity  :       ± 1°C
  • Humidity Range                 :       40% RH to 90% RH
  • Humidity Accuracy            :       ± 2% RH
  • Humidity Uniformity        :       ± 3% RH
  • Supply                                  :        230V Ac, 50 Hz, Single Phase.

Models & Optional Features

 

Cat.No. Capacity (Litres) Inner Dimension
(H x W x D cms)
Trays
TI-710 100 Ltrs 50 x 50 x 40  2
TI-711 170 Ltrs 70 x 60 x 40  2
TI-712 200 Ltrs 60 x 60 x 60 2
TI-713 285 Ltrs 80 x 60 x 60 3
TI-714 325 Ltrs 90 x 60 x 60 4
TI-715 400 Ltrs 110 x 60 x 60 4
TI-716 600 Ltrs 125 x 70 x 70 4
TI-717 800 Ltrs 157 x 70 x 70 5
TI-718 1000 Ltrs 157 x 80 x 80 5

Optional Features

■   Imported RH sensor make, Rotronic Switzerland for higher accuracy & RH 95%.
■   PLC for auto change over for standby refrigeration & humidity system with HMI.
■   CFR 21 part 11 compliance software.
■   Stand by refrigeration system.
■   Stand by humidity system.
■   Data Logger
■   Safety digital temperature controller
■   Data Scanner complete with sensor.
■   SMS Mobile alert system.
■   Door access security system.
■   Timer