# TEMPO Instruments


## Posts

- [HOT AIR OVEN SELECTION: THE DEFINITIVE GUIDE](https://tempoinstruments.com/hot-air-oven-selection-the-definitive-guide/): hot air oven uses dry heat sterilization. It has to operate for long durations to perform the task. The hot air oven has to last for many years to perform such a heavy-duty task so it is necessary to carefully select the lab oven that satisfies all your operational needs. This post will help you in selecting your hot air oven with all the features as per your requirement. So read to the end to get the complete details. Types of hot air oven Heat is distributed inside the chamber either by gravity convection or by the forced air draft. Different […]
- [Hot Air Oven Working](https://tempoinstruments.com/hot-air-oven-working/): A hot air oven is a dry heat sterilization oven. It is used in the various industries where the materials or instruments were sterilized. Out hot air oven uses high temperature and runs for several hours to destroy the bacteria. Characteristics of the material for heat sterilization The hot air oven consists of stainless steel rod trays where the material is placed for the heating. First, the door is open and the material is placed on the trays. The material that needs to be sterilized has characteristics like a higher melting point. It also has to be fire-resistant so it will not […]
- [Difference between the Lab Oven and Lab Furnace](https://tempoinstruments.com/difference-between-the-lab-oven-and-lab-furnace/): There is often confusion between the hot air oven and the laboratory furnace. As both are used for heating purposes, there is little difference between the equipment. So read through the end to get a complete understanding between these two. Some key factors separated the hot air oven and the laboratory furnace. Temperature range Temperature range is the main factor that differentiates the hot air oven from the muffle furnace. As the hot air oven can achieve a temperature of 5°C to 450°C, the furnace is used particularly for higher temperature application. Our furnace is designed to provide the operating temperature from […]
- [Hot Air Oven Construction](https://tempoinstruments.com/hot-air-oven-construction/): A hot air oven is equipment used for dry heat sterilization. In this method, the equipment is heated inside the oven at a specific temperature to kill the microorganisms. The materials used in laboratories is a good conductor of heat so they serve to be ideal for dry heat sterilization. Construction of hot air oven Cabinet – The cabinet is the outermost body of the hot air oven. It consists of stainless steel. It is insulated from the inside so that the heat won’t escape and the temperature inside the chamber remains constant. Shelves – The inner chamber is provided with shelves. […]
- [HOT AIR OVEN: THE DEFINITIVE GUIDE](https://tempoinstruments.com/hot-air-oven-the-definitive-guide/): Hot air oven  Hot air ovens are laboratory and scientific equipment which uses dry heat (hot air mixture) for sterilization of laboratory equipment. The dry heat sterilization process is developed by Louis Pasteur to sterilize the equipment using the hot air ovens. Dry heat sterilization is the heating process in which the material which is placed inside the oven has characteristics which will not melt, catch fire or change its form while heating at high temperature. Our hot air oven runs at extremely high temperature for several hours to destroy the bacteria. The general temperature range required for operation varies from 5°C to […]

## Pages

- [Large Capacity Oven 6000L.](https://tempoinstruments.com/large-capacity-oven-6000l/)
- [Deluxe Oven](https://tempoinstruments.com/deluxe-oven/): The Deluxe Oven is a high-precision, PLC controlled heating system designed forlaboratories, industrial facilities, and research environments requiring accurate and uniform temperature performance. Equipped with advanced monitoring, communication, and safety features, it ensures reliable operation for a wide range of thermal applications. Specification Temperature range 5°C above ambient to 225°C Supports a broad range of heating applications, from low-temperature conditioning to high- temperature drying and curing operations. Temperature accuracy ±0.2°C High-precision sensors and control algorithms maintain extremely stable temperatures, ensuring reproducible results. Temperature uniformity ± 5°C Optimized chamber design and airflow distribution ensure consistent temperature throughout the workspace, even under […]
- [Industrial Ovens](https://tempoinstruments.com/industrial-ovens/): Large Capacity Oven- 6000L.Temp. range- 50°C to 250°C Looking for Exclusive Product ? Send Us Request
- [Rubber industry catalogue](https://tempoinstruments.com/rubber-industry-catalogue/): Download product catalogue Click here
- [Gas cylinder warmer](https://tempoinstruments.com/gas-cylinder-warmer/): Full coverage warms entire body of gas cylinder10 ft (3 m) long power cord. Outer Material: Silicone impregnated cloth2 Inch thick fiberglass insulationUp to 150 watts total wattage230V voltageFrequency range: 50-60 HzVelcro or belt closureAmbient Temperature Range: 5 to 30°C10 feet long HCW power cord with bare wire leads.
- [Industry & Applications](https://tempoinstruments.com/industry-applications/): Flexotherm used in Industries Composite curing Gas handling General manufacturing Food processing Agriculture Oil & Gas Water Treatment Chemical Processing Paper packaging Application in- Laboratory Cryogenic Reactor Distillation Packaging machine Gas cylinder warmer Petroleum jelly
- [Controlling Unit for Heaters & Jackets](https://tempoinstruments.com/controlling-unit-for-heaters-jackets/):   Our intelligent control solutions ensure precise temperature management and safety across various heating applications. Features– Digital PID Controller. Multiple sensor compatibility: RDT, Thermocouple (J,K, PT100). User define set points and alarms. Relay/ SSR Output for heater control. Overheat protection and emergency shutdown. Panel- mounted or Wall-mounted option. Integrated MCB, Contactor and Indication lights. Applications– Ideal for user with: Flexible heaters. Immersion heaters. Drum heaters. Mica and ceramic band heaters. Custom Industrial Heating System. Customization Options- Multi-zone control panels. Custom branding and wiring layouts.
- [Container heating](https://tempoinstruments.com/container-heating/): Drum heating jacket Electric drum heaters are used to heat the contents of drums or barrels, typically in industrial settings. Jacket type electric drum heaters wrap around the drum and provide uniform heating. Flexible construction allows the heater to conform closely to the drum’s shape for efficient heat transfer. Silicon Rubber Drum Heater/ Belt Heater ( 120°C ) For standard 200 Liter, 50 Liter & customized sizes Chemical and moisture resistant and extremely rugged Fitted with adjustable retaining spring and quick release hooks. Available with or without temperature control. 240 volt AC Ideal for wide variety of plastic, fibre and […]
- [Bio Safety Cabinet](https://tempoinstruments.com/bio-safety-cabinet/): Series TI-53 Tempo make Bio-safety cabinets are used to giveoperator, environment & product protection when handlingdangerous Biological Material.     Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Max surface temp 300°C to 350°C 300°C to 350°C https://youtu.be/ptkKnHmqOLE?si=xBiZuX2vT1Sngily Construction Motor System Backward curved centrifugal fans Low noise Filter System Pre filter efficiency EU-5 rating – Efficiency: 95% down to 5 micron HEPA filter efficiency Eu-13rating (99.997% down to 0.3 microns) Material of Construction Inner SS 304 […]
- [CUSTOM HEATING SOLUTION](https://tempoinstruments.com/custom-heating-solution/):  We specialize in designing and manufacturing tailor-made heating systems to meet yourspecific application needs. Our solutions include: Customized heater designs for unique shapes, sizes, and thermal profiles. When standard heating devices unable to heat up. Material and wattage selection based on process and environment.  Integration support for sensors, controllers, and automation. Custom heating solution for reaction process. Industry-specific solutions for pharma, chemical, packaging, automotive, and more. Whether it’s a one-off project or a large-volume application, we deliver precise, energy-efficient, and reliable heating systems built around your process requirements. Call US: 9820464003 9820840572 Location: Top Syringe Compound, W.E Highway, Pandurang Wadi,Mira […]
- [Applications](https://tempoinstruments.com/applications/): Cement Industry Products Curing Tank Read More Accelerated Curing Tank Read More Dry Shrinkage / Stability Chamber Read More Stability Chamber Read More LR Oven / Humidity Oven Read More Multi Door Humidity Chamber Read More Laboratory Oven (Natural Convection) : 250°C Read More Laboratory Precision Oven (Forced Air Circulation) Read More Laboratory Precision Oven High Temperature 400°C Read More BOD Incubator Read More Muffle Furnace (930°C/1200°C) Read More Fume Hood Read More Le Chaterlier Bath for Mould Read More Le Chatelier Bath for Flask Read More Sand Bath Rectangular Read More Hot Plate Read More Call US: 9820464003 9820840572 […]
- [Sand Bath Rectangulator](https://tempoinstruments.com/sand-bath-rectangulator/): “TEMPO” make Le chatelier bath Standard Models Inside SS 304 with mirror finish argon welded one piece pot. Outer galvanised iron sheet with powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Model shape rectangular Maximum surface temperature 200°C Controlling system thermostatic controller rectangular 200°C thermostatic controller Models & Optional Features Models SS 304 Bath Size (inch) Rating (KW) TI – 87 A 10 × 12 1.2 TI – 87 B 12 × 18 2 TI – 87 C 18 × 24 3.5 Looking for Exclusive Product ? Send […]
- [Le Chatelier Bath for Flask](https://tempoinstruments.com/le-chatelier-bath-for-flask/): Series TI-500 “TEMPO” make Le chatelier bath Standard Models Inside SS 304 with mirror finish argon welded one piece pot. Outer galvanised iron sheet with powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C to 60°C Temperature accuracy ±1°C Set point  27°C Supply 230V, AC 5°C to 60°C ±1°C  27°C 230V, AC https://youtu.be/ptkKnHmqOLE?si=xBiZuX2vT1Sngily Construction Double walled construction with inner SS argon welded one piece pot which avoids leakages. Features The fibre/PU wheel with front blockage for easy movement. The circulation pump is used to drain. Safety […]
- [Le Chatelier Bath For Mould](https://tempoinstruments.com/le-chatelier-bath-for-mould/): Temperature range 5°C above ambient to 99°C Temperature accuracy ±0.5°C Supply 230, Single phase 5°C above ambient to 99°C ±0.5°C 230, Single phase Looking for Exclusive Product ? Send Us Request
- [Laboratory Precision Oven](https://tempoinstruments.com/laboratory-precision-oven/): “TEMPO”make lab precision ovens are provided with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air to maintain the uniformity of temperature inside the chamber.   Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C above ambient to 300°C Temperature accuracy ±0.2°C Temperature uniformity ±2°C Supply 230V, AC 5°C above ambient to 300°C ±0.2°C ±2°C 230V, AC Construction Ovens are made of double wall […]
- [Laboratory Oven (Natural Convection)  250°C](https://tempoinstruments.com/laboratory-oven-natural-convection-250c/): Hot air ovens use dry heat sterilization. “TEMPO” make lab precision oven (hot ait oven) uses forced air circulation method to get the desired temperature profile. In the dry heat sterilization process, the material used for heating has the characteristics of a high melting point and it will not catch fire or changes its form while heating at a higher temperature. To ensure the homogeneous hot air mixture inside the oven, a motorized blower is fitted on the top of the chamber which ensures the exact temperature inside the chamber.  Standard Models Inner chamber made of stainless steel (SS304) mirror finish and […]
- [Multi Door Humidity Chamber](https://tempoinstruments.com/multi-door-humidity-chamber/): Temperature range 20°C to 60°C Temperature accuracy ±0.2°C Humidity Range 40% Rh to 95% Rh Humidity Accuracy ±2%Rh Humidity Uniformity ±3%Rh 20°C to 60°C ±0.2°C 40% Rh to 95% Rh ±2%Rh ±3%Rh Application Muffle Furnace is designed for R&D labs, Educational institutions , Medicine and Industry, Chemical Industries, Plastic Industry, Moulding Industry, Glass Industry, Rubber Industry, Ceramics Industry, Biomedical Industry, Paint Industry, Textile Materials, Pharma Industry, Dental Labs, Thermal Process Technology, Advanced Materials for following applications, Testing, Analysing, Ashing, Drying, Sintering, Annealing, Melting, Tempering, Hardening, Dental Porcelain, and Crystalizing etc. Models & Optional Features Models Capacity litres Internal Dimensions H […]
- [LR Oven / Humidity Oven](https://tempoinstruments.com/lr-oven-humidity-oven/): “TEMPO” make humidity ovens are manufactured and design for electrical & electronic industries for testing components and equipment as per ISO 9000:2015 Testing cement, batteries, cigarettes, or any other material demanding controlled temperature & humidity. It is also used in industries like pharmaceutical for accelerating ageing, food & beverage, packing, department of botany, cytology, plant & animal breeding. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C above ambient to 60°C Temperature accuracy ±0.5°C […]
- [Dry Shrinkage / Stability Chamber](https://tempoinstruments.com/dry-shrinkage-stability-chamber/): Humidity Control System Imported microprocessor-based  auto-tuned PID controller with CE mark and dual display of set value & process value with direct % RH. Imported RH sensor Europen make Rotronic for higher accuracy and RH 95% Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Models & Optional Features Models Capacity Litres Internal Dimensions H × W × D (cm) No of cubes of 11 × 11 cms per Tray No of Trays 710 CC 100 50 […]
- [Accelerated Curing Tank](https://tempoinstruments.com/accelerated-curing-tank/): Models & Optional Features Models Internal Tank Size L × W × H (cm) Capacity Litres TI – 661 55 × 25 × 40 55 TI – 662 55 × 45 × 40 99 TI – 663 70 × 65 × 40 182 TI – 664 100 × 65 × 40 260 Looking for Exclusive Product ? Send Us Request
- [Laboratory hot air oven](https://tempoinstruments.com/laboratory-hot-air-oven/): Natural Convection Oven When your testing requires walk-in rooms our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Read More Lab Precision Oven 250°C When your testing requires walk-in rooms our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Read More Lab Precision Oven 300°C When your testing requires walk-in rooms our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Read More Lab Drying Oven Our test rooms feature automated process control, energy […]
- [Stability Humidity Chambers](https://tempoinstruments.com/stability-humidity-chambers/): Stability Chamber The stability chamber is used for confirmatory studies. The sample is exposed to light the allows the direct comparison between the substance. Read More Photostability Chamber The photostability chamber is used for confirmatory studies. The sample is exposed to light the allows the direct comparison between the substance. Read More Stability Humidity Chamber The photostability chamber is used for confirmatory studies. The sample is exposed to light the allows the direct comparison between the substance.   Read More
- [Walk in Chamber](https://tempoinstruments.com/walk-in-chamber/): Walk in Stability Chamber When your testing requires walk-in rooms our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Read More Walk in Lab Refrigerator When your testing requires walk-in rooms our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Read More Walk in BOD Incubator When your testing requires walk-in rooms our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Read More Walk in Bacteriological Incubator Our test rooms feature automated process […]
- [Incubator](https://tempoinstruments.com/incubator/): BOD Incubator Our  BOD incubators are manufactured to comply requirement of industries and are specifically designed for the long term and stable continuous operation. Read More Bacteriological Incubator Our bacterioological incubators are manufactured to comply requirement of industries and are specifically designed for the long term and stable continuous operation. Read More
- [Refrigerators](https://tempoinstruments.com/refrigerators/): Laboratory Refrigerator The motorized blower is provided at the backside of the chamber, which develops a unique airflow system to maintain a uniform temperature. Read More Glass Door Refrigerator The glass door refrigerators are stable and reliable with the refrigerated environment for exact laboratory requirements for pharmaceutical and industrial use. Read More
- [Deep Freezer](https://tempoinstruments.com/deep-freezer/): Deep Freezer -20°C The ideal freezing environment for advanced medical and industrial applications and also suitable for research laboratories, blood bank etc. Read More Deep Freezer -40°C The ideal freezing environment for advanced medical and industrial applications and also suitable for research laboratories, blood bank etc. Read More
- [Laboratory Furnaces](https://tempoinstruments.com/laboratory-furnaces/): Laboratory Furnace 1700°C The laboratory furnaces are designed to operate under higher temperature applications with short heat up time, minimal maintenance and provide resistance to thermal shock over extended periods. Read More Laboratory Furnace 1450°C The laboratory furnaces are designed to operate under higher temperature applications with short heat up time, minimal maintenance and provide resistance to thermal shock over extended periods.   Read More Laboratory Furnace 1300°C The laboratory furnaces are designed to operate under higher temperature applications with short heat up time, minimal maintenance and provide resistance to thermal shock over extended periods. Read More Economy Laboratory Furnace […]
- [Water Baths](https://tempoinstruments.com/water-baths/): Water Bath The water baths are designed and manufactured to comply with the requirements of the various pharmaceutical and lab industries. Read More Water Bath The water baths are designed and manufactured to comply with the requirements of the various pharmaceutical and lab industries. Read More Shaker Water Bath The shaker water baths are designed and manufactured to comply with the requirements of the various industries. Read More Cryo Bath The cryo baths are designed for research work and is provided with the circulating pump to ensure uniform temperature. Read More Constant Temperature Water Bath The constant temperature water bath […]
- [Laboratory Autoclaves](https://tempoinstruments.com/laboratory-autoclaves/): Vertical Autoclave “Tempo”make Vertical autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc Read More Laboratory Autoclave “Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Food research & Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Read More Radial Locking Autoclave “Tempo” make Radial Locking Autoclave  are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Read More Triple Wall Autoclave “Tempo” make Triple Wall Autoclave are suitable for Pharma & […]
- [Flexible Heating Solution](https://tempoinstruments.com/flexible-heating-solution/): Heavy Insulated Heating Tapes (350°C) Heating Tapes are ready to use, wrap around flexible heating elements used for heating cylindrical vessels, pipes etc. 350°C High Temperature Capability for continuous use. These Heavy Insulated Tapes Can be used on both Conductive & non conductive surfaces. Read More Standard Insulated Heating Tapes (350°C) These Tapes are recommended for use on non-conductive surfaces such as glass or ceramic. (Not recommended for Conductive surfaces such as metal etc) 350°C High Temperature Capability for continuous use. Read More Silicon Heating Tapes (180°C) 180°C High Temperature Capability for continuous use. Extruded Silicon Rubber outer cover. Moisture […]
- [DaVinci Laboratory Repetitive Dispensing Syringe](https://tempoinstruments.com/davinci-laboratory-repetitive-dispensing-syringe/): Series TI-128HT Recommended Applications Reagent distribution Hot Agar Sterile work Filling of well plates HPLC vial preparation Small batch injection vials Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Automatic filling for each preset dose Autoclavable at 121°C for 20 minutes. Durable Reliable Comfort Sizes available 0.05ml to 10 ml Better Suited for Distribution of sterile Hot Agar Distribution of cell culture media DaVinci Self Refilling Syringe (Feed Tube Set) 70 Series The DaVinci self refilling […]
- [Liquid Handling](https://tempoinstruments.com/liquid-handling/): Corto Fluid Dispenser The ‘CORTO’ Glass Syringe Pump is a Repetitive dispenser for fluid transfer that facilitates repeatable dosage distribution. Read More DaVinci Self Refilling Syringe The DaVinci self refilling syringe line offers safe and reliable liquid distribution, the selection comes in a range of volumes. Read More
- [Pass Box](https://tempoinstruments.com/pass-box/): Static Pass Box The static pass box acts as an airlock device. It is designed to minimize traffic and contamination entry into the cleanroom and designed with quality standards. Read More Dynamic Pass Box This dynamic pass box is designed to minimize traffic and contamination entry into the cleanroom and designed with international quality standards. Read More
- [Economy Laboratory Furnace 1300°C](https://tempoinstruments.com/economy-laboratory-furnace-1300c/): Series TI-820 Temperature range 1450°C max (1400°C continuous) Supply Single phase/three phase 1450°C max (1400°C continuous) Single phase/three phase Standard Models Outside mild steel with hammertone paint GMP Models Outside stainless steel 304 “TEMPO” laboratory furnaces are designed for higher temperature applications. The design is based on the highest standards for quality with efficient high-temperature use and minimal maintenance. Silicon carbide element with easy assembly. These lab furnaces are Ideal for rapid cycling over extended periods. The advance design feature provides fast heat up and recovery with excellent uniformity and energy efficiency, increased resistance to thermal shock, ideal for rapid cycling over […]
- [Laboratory Furnace 1450°C](https://tempoinstruments.com/laboratory-furnace-1450c/): Series TI-820 Temperature range 1450°C max (1400°C continuous) Supply Single phase/three phase 1450°C max (1400°C continuous) Single phase/three phase Standard Models Outside mild steel with hammertone paint GMP Models Outside stainless steel 304 “TEMPO” laboratory furnaces are designed for higher temperature applications. The design is based on the highest standards for quality with efficient high-temperature use and minimal maintenance. Silicon carbide element with easy assembly. These lab furnaces are Ideal for rapid cycling over extended periods. The advance design feature provides fast heat up and recovery with excellent uniformity and energy efficiency, increased resistance to thermal shock, ideal for rapid cycling over […]
- [Laboratory Furnace 1300°C](https://tempoinstruments.com/laboratory-furnace-1300c/): Series TI-820 “TEMPO” laboratory furnaces are designed for higher temperature applications. The design is based on the highest standards for quality with efficient high-temperature use and minimal maintenance. Silicon carbide element with easy assembly. These lab furnaces are Ideal for rapid cycling over extended periods. The advance design feature provides fast heat up and recovery with excellent uniformity and energy efficiency, increased resistance to thermal shock, ideal for rapid cycling over extended periods.   Temperature range 1300°C max (1250°C continuous) Supply Single phase/three phase 1300°C max (1250°C continuous) Single phase/three phase Standard Models Outside mild steel with hammertone paint GMP Models Outside […]
- [Laboratory Furnace 1700°C](https://tempoinstruments.com/laboratory-furnace-1700c/): Series TI-820 Temperature range 1700°C max Supply Single phase/three phase 1700°C max Single phase/three phase Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 “TEMPO” make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Specification Application Muffle Furnace is designed for R&D labs, Educational institutions , Medicine and Industry, Chemical Industries, Plastic Industry, Moulding Industry, Glass Industry, Rubber Industry, Ceramics Industry, Biomedical Industry, Paint Industry, Textile Materials, Pharma Industry, Dental Labs, Thermal Process Technology, Advanced […]
- [Laboratory Furnace 930°C](https://tempoinstruments.com/laboratory-furnace-930c/): Series TI-58 “TEMPO” make muffle furnace are designed and manufactured to comply with the requirements of laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc. “TEMPO” make a muffle furnace in a horizontal/rectangular model. Insulation is provided with high-grade insulation material. Standard Models Outside mild steel with hammertone paint GMP Models Outside stainless steel 304 Max temperature 930°C max Supply Single phase 930°C max Single phase Specification Construction Reach 930°C for high temperature applications in a short time. This laboratory furnace is designed to operate under […]
- [Laboratory Furnace 1200°C with Shell](https://tempoinstruments.com/laboratory-furnace-1200c-with-shell/): Series TI-58 “TEMPO” make shell laboratory furnace are designed and manufactured to comply with requirements for laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc.  “TEMPO” make laboratory furnaces are constructed in the horizontal or rectangular model. The insulation is provided with high grade insulation material. Standard Models Inner made of a ceramic pot, Outer case made from thick gauge mild steel (CRCA) sheet. GMP Models Inner made of a ceramic pot, the outer case made from thick gaug stainless steel (SS304) Max temperature 1150°C continuous […]
- [Laboratory Furnace 1200°C](https://tempoinstruments.com/laboratory-furnace-1200c/): Series TI-58 “TEMPO” make muffle furnace are designed and manufactured to comply with the requirements of laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc. “TEMPO” make a muffle furnace in a horizontal/rectangular model. Insulation is provided with high-grade insulation material. Standard Models Outside mild steel with hammertone paint GMP Models Outside stainless steel 304 Temperature range 1200°C continuous Supply Single phase 1200°C continuous Single phase Specification Optional Features Data logger CFR 21 part 11 compliance software for data logger Safety digital temperature controller Timer Features […]
- [Raising Hearth Furnace](https://tempoinstruments.com/raising-hearth-furnace/): Series TI-820 Temperature range 1800°C max Supply Single phase/three phase 1800°C max Single phase/three phase Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 “TEMPO” make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Specification Application Raising Hearth Furnace is designed for R&D labs, Educational institutions, Medicine and Industry, Thermal Process Technology, Dental Labs, Advanced Materials for following applications- Drying, Hardening, Annealing, Brazing, Sintering, Research, Heat treatment, Dental crowns and frameworks etc. Features Maximum operating […]
- [CVD Furnace](https://tempoinstruments.com/cvd-furnace/): Series TI-820 Temperature range 1200°C max Supply Single phase/three phase 1200°C max Single phase/three phase Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 “TEMPO” make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Specification Application CVD Furnace is designed for R&D labs, Educational institutions, Medicine and Industry, Aerospace industry, Semiconductor industry, Chemical Industries, Biomedical Industry, Pharma Industry, glass Industry, Thermal Process Technology, Advanced Materials for following Chemical analysis, Graphene, Optical Fibre, Composition, Deposition, Diffusion, […]
- [Tube Furnace](https://tempoinstruments.com/tube-furnace/): Series TI-820 Temperature range 1800°C max Supply Single phase/three phase 1800°C max Single phase/three phase Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 “TEMPO” make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Specification Application Tube Furnace is designed for R&D labs, Educational institutions, Medicine and Industry, Chemical Industries, Ceramics Industry, Biomedical Industry, Pharma Industry, Thermal Process Technology, Advanced Materials for following applications- Purification, Coating, Drying, Hardening or Ageing of samples, Annealing, Brazing, Calcination, […]
- [MBRT Water Bath](https://tempoinstruments.com/mbrt-water-bath/): Series TI-610 “TEMPO” make MBRT water bath are made of double wall construction. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C above ambient to 98°C 5°C above ambient to 98°C https://youtu.be/ptkKnHmqOLE?si=xBiZuX2vT1Sngily Construction “TEMPO” made MBRT water bath are made up of the double wall. The interior is made from SS 304 an exterior from MS duly powder coated. The temperature is controlled by means of PID controller cum indicator. Features Lower water level […]
- [Ultrasonic Bath](https://tempoinstruments.com/ultrasonic-bath/): Series TI-610 “TEMPO” make ultrasonic baths have been specifically designed & fabricated to removes micro dust, clot, and bloodstains from different kinds of machines and instruments. The clients can get these cleaners from us at different specifications. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C above ambient to 65°C Ultrasonic efficiency 40Khz, ±3Khz Supply 230V, AC 5°C above ambient to 65°C 40Khz, ±3Khz 230V, AC Construction “TEMPO” make Ultrasonic bath is double walled construction with […]
- [Low Temperature Bath (-20°C)](https://tempoinstruments.com/low-temperature-bath-20c/): Series TI-610 “TEMPO” low temperature baths are designed for research work at the desired temperature with high accuracy. The temperature is controlled by microprocessor based PID controller with an accuracy of ±1°C. The unit is provided with a circulation pump to ensure uniform temperature. Low temperature bath offers a combination of contemporary design, advance microcontroller and a range of accessories to suit your specific laboratory or process application. High strength cabinet construction with stainless steel interior tanks withstand the most critical applications in demanding laboratory environments. The unit is mounted on castor wheels for ease of mobility. Standard Models Inside SS […]
- [Constant Temperature Water Bath](https://tempoinstruments.com/constant-temperature-water-bath/): Series TI-610 “TEMPO” make constant temperature water bath are ideal for application in refractometry, polarimetry, rotational viscometry, in biotechnology laboratories for the development of culture applications & general laboratory work. Besides it, these constant temperature water baths are useful in the chemical industry, biology, pharmacy, environmental protection, hygiene & disease control, academies and other science research and producing areas. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range  5°C above ambient to 90°C Temperature accuracy […]
- [Cryo Bath](https://tempoinstruments.com/cryo-bath/): Series TI-610 “TEMPO” make cryo baths are designed for research work with the desired temperature with high accuracy. The temperature is controlled by means of microprocessor based PLD controller with an accuracy of 1°C. The unit is provided with a circulating pump to ensure uniform temperature. “TEMPO” cryo bath offers a combination of contemporary cabinet design, advanced microcontroller and a range of accessories to suit your specific laboratory or process application. The baths are provided with high strength cabinet construction with stainless steel interior tanks withstand the most critical applications in demanding environments. The unit is mounted on castor wheels for ease […]
- [Shaker Water Bath](https://tempoinstruments.com/shaker-water-bath/): Series TI-242 “TEMPO” make reciprocating shaker water baths are designed and manufactured to comply requirements of industries. Shaker water baths are used for sample thawing, bacteriological examinations, warming reagents, coliform determinations, microbiological assays, hybridization applications, cell culture and aeration, increasing solubility rates, molecular assays and bacterial cultures. Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 Specification Temperature range 20°C above ambient to 95°C Temperature accuracy ±0.5°C Shaking speed 40 to 120 RPM Speed indicator digital 20°C above ambient to 95°C ±0.5°C 40 to 120 RPM digital Construction These […]
- [Water Bath (Serological)](https://tempoinstruments.com/water-bath-serological/): Series TI-240 – 241 “TEMPO” serological water bath have SS interior and powder coated mild steel exterior. The temperature is controlled by means of a precision thermostat. Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 Specification Temperature range  5°C above ambient to 60°C  5°C above ambient to 60°C Construction Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints are argon welded. Jointless silicon gasket. Heavy duty industrial flange heater. Lid fitting pressure gauge 0-30 […]
- [Water Bath](https://tempoinstruments.com/water-bath/): Series TI-240 – 241 Tempo Water Bath have S.S. 316 Interior and S.S. 304 exterior. Temperature Range is from 5°C above ambient to 99°C max. Temperature is controlled by PID controller. Equipment is supplied with Pyramidal Lid. Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 Specification Temperature range 5°C above ambient to 99°C Supply 230V, AC 5°C above ambient to 99°C 230V, AC Construction Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints […]
- [Pedal Free Autoclave](https://tempoinstruments.com/pedal-free-autoclave/): Series TI-123 “Tempo” make  Pedal Free Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc GMP Models Inside SS 316 & outside stainless steel 304 Standard Models Inside and outside are made of SS 304 Specification Temperature range 121oC to 125oC Pressure range 15 to 22 PSI Factory set 15 PSI at 121oC Supply 230 Volt, AC, Single Phase, 50Hz 121oC to 125oC 15 to 22 PSI 15 PSI at 121oC 230 Volt, AC, Single Phase, 50Hz Construction Vertical double walled design has a single chamber for steam & […]
- [Triple Wall Autoclave](https://tempoinstruments.com/triple-wall-autoclave/): Series TI-124 “Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc GMP Models Inside SS 316 & outside stainless steel 304 Standard Models Inside and outside are made of SS 304 Specification Temperature range 121oC to 125oC Pressure range 15 to 22 PSI Factory set 15 PSI at 121oC Supply 230 Volt, AC, Single Phase, 50Hz 121oC to 125oC 15 to 22 PSI 15 PSI at 121oC 230 Volt, AC, Single Phase, 50Hz Construction Vertical double walled design has a single chamber for steam & water. […]
- [Radial Locking Autoclave](https://tempoinstruments.com/radial-locking-autoclave/): Series TI-125 “Tempo” make Radial Locking Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc GMP Models Inside SS 316 & outside stainless steel 304 Standard Models Inside and outside are made of SS 304 Specification Temperature range 121oC to 125oC Pressure range 15 to 22 PSI Factory set 15 PSI at 121oC Supply 230 Volt, AC, Single Phase, 50Hz 121oC to 125oC 15 to 22 PSI 15 PSI at 121oC 230 Volt, AC, Single Phase, 50Hz Construction Vertical double walled design has a single chamber for steam & […]
- [Laboratory Autoclave](https://tempoinstruments.com/laboratory-autoclave/): Series TI-121 “Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Food research & Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 Specification Temperature range 121oC to 125oC Pressure range  15 to 22 PSI Factory set 15 PSI at 121oC Supply 230 Volt, AC, Single Phase, 50Hz 121oC to 125oC  15 to 22 PSI 15 PSI at 121oC 230 Volt, AC, Single Phase, 50Hz Construction Vertical double walled design has a single chamber for […]
- [Vertical Autoclave](https://tempoinstruments.com/vertical-autoclave/): Series TI-121 “TEMPO” make vertical autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Standard Models Inside and outside are made of SS 304 GMP Models Inside SS 316 & outside stainless steel 304 Specification Temperature range 121°C to 125°C Pressure range 15 to 22 PSI Factory set 15 PSI at 121°C Supply 230V, AC 121°C to 125°C 15 to 22 PSI 15 PSI at 121°C 230V, AC Construction Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also […]
- [Silicon Heating Cord (100°C)](https://tempoinstruments.com/silicon-heating-cord-100c/): • Safe for use with metal and electrically conductive surfaces.• Widely used in deep freezer ,refrigerators etc• Temperature controller system (Digital / Thermostatic) can beprovided for display, monitoring and safe operation Standard Models Inside SS 304 with mirror polish & outside mild steel duly powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C above ambient to 80°C Temperature accuracy ±0.2°C Supply 230V, AC 5°C above ambient to 80°C ±0.2°C 230V, AC https://youtu.be/ptkKnHmqOLE?si=xBiZuX2vT1Sngily Construction “TEMPO” make bacteriological incubator are made up of double walled construction. Full view […]
- [Flexible Insulated Heating Cord (400°C)](https://tempoinstruments.com/flexible-insulated-heating-cord-400c/): “TEMPO” make heating cords are flexible allow making heating elements in any shape for heating fractionation columns, glassware or just about anythe vessel in the laboratory or pilot plant. • Heating cords are used when heating tapes are too bulky orcumbersome• Ideal for laboratory, R&D, gas tubing, production, maintenance,temporary heat, and more…• These 6 mm diameter cords solve a wide range of limited-spaceheating applications inlaboratory, production, or Industrial applications.• Rapid thermal response.• Temperature controller system (Digital / Thermostatic) can beprovided for display, monitoring and safe operation. Standard Models Inside SS 304 with mirror polish & outside mild steel duly powder coated. […]
- [Silicon Heating Tape](https://tempoinstruments.com/silicon-heating-tape/): “TEMPO” make Silicon Heating Tapes are ready to use, wrap around flexible heating elements for heating cylindrical vessels, pipes etc. can be easily installed, removed and used again. • Max operation Temperature 180°C • Silicone Rubber Outer Cover • Moisture Resistant construction. • Lead Wires on one end • Spiral Heating Element design to give bettertemperature uniformity.• Robust & Flexible Element.• Lower Watt Density, enhancing longer life through better distribution of heat. (Lowerwatts per cm of wire)• 25mm wide tapes may be easily applied to diameters as small as 12mm.• Temperature controller system (Digital /Thermostatic) can be provided for display,monitoring and […]
- [Standard Insulated Heating Tapes (350°C)](https://tempoinstruments.com/standard-insulated-heating-tapes-350c/): These Tapes are recommended for use on non-conductive surfaces such as glass or ceramic. (Not recommended for Conductive surfaces such as metal etc) “TEMPO” make Heating Tapes are ready to use, wrap around flexible heating elements for heating cylindrical vessels, pipes etc. can be easily installed, removed and used again. • Lead Wires on one end• Spiral Heating Element design to give bettertemperature uniformity.• Robust & Flexible Element.• Lower Watt Density, enhancing longer life through better distribution of heat. (Lowerwatts per cm of wire)• 25mm wide tapes may be easily applied to diameters as small as 12mm.• Temperature controller system (Digital […]
- [Heavy Insulated Heating Tape(350°C)](https://tempoinstruments.com/heavy-insulated-heating-tape350c/): “TEMPO” make Heating Tapes are ready to use, wrap around flexible heating elements for heating cylindrical vessels, pipes etc. can be easily installed, removed and used again. • Lead Wires on one end• Spiral Heating Element design to give bettertemperature uniformity.• Heavy Braided Fibre Glass Outer Cover..• Robust & Flexible Element.• Lower Watt Density, enhancing longer life through better distribution of heat. (Lowerwatts per cm of wire)• 25mm wide tapes may be easily applied todiameters as small as 12mm.• Temperature controller system (Digital /Thermostatic) can be provided for display,monitoring and safe operation. Standard Models Inside SS 304 with mirror polish & […]
- [Fume Hood](https://tempoinstruments.com/fume-hood/): Series TI-12 “TEMPO” make fume hood is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapours or dust. Air is drawn from lab space into the fume hood then dispersed via a pipe to the outside atmosphere. Basically, it protects the user from inhaling toxic gases.   Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Max surface temp 300°C to 350°C 300°C to 350°C https://youtu.be/ptkKnHmqOLE?si=xBiZuX2vT1Sngily Construction Exhaust […]
- [Curing Tank](https://tempoinstruments.com/curing-tank/): Series TI-121 “TEMPO” make laminar airflow cabinets are a series of high efficiency clean room workbenches designed to protect equipment and other contents of the work zone from particulates. In a vertical laminar airflow cabinet, filtered air blows on the work zone and leaves through the holes in the base of three sides SS 304 covered sheet. As compared to horizontal type, vertical flow cabinet can provide greater operator protection. Temperature range 20°C to 35°C Temperature accuracy ±1°C Supply 230V, AC Controlling System Temperature is controlled by means of microprocessor based PID controller cum indicator. Refrigeration is achieved by means of […]
- [Laminar Air Flow](https://tempoinstruments.com/laminar-air-flow/): Series TI-51 “TEMPO” make laminar airflow cabinets are a series of high efficiency clean room workbenches designed to protect equipment and other contents of the work zone from particulates. In a vertical laminar airflow cabinet, filtered air blows on the work zone and leaves through the holes in the base of three sides SS 304 covered sheet. As compared to horizontal type, vertical flow cabinet can provide greater operator protection. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff […]
- [Magnetic Stirrer](https://tempoinstruments.com/magnetic-stirrer/): Series TI-72 TEMPO Magnetic Stirrers with Aluminium top housing are most compact models. Permanent Magnet DC (PMDC) motor gives high torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Different models available for all types of laboratory stirring applications up to 5 liters. Accurate stepless speed control with digital display allows smooth variation up to 1200 rpm. Heat energy is controlled by energy regulator. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff […]
- [Hot Plate](https://tempoinstruments.com/hot-plate/): Series TI-70 “TEMPO” make hot plates are widely used in various industries such as automobile, chemical, pharmaceuticals and others. Available in various specifications. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Max surface temp 300°C to 350°C 300°C to 350°C Construction make Hot Plates are constructed with thick gauge mild steel well machined & smooth cast iron top. This cast iron is grooved from bottom to circulate spiral heaters. Features Grooved cast iron top with the […]
- [COD Digester](https://tempoinstruments.com/cod-digester/): Series TI-100 TEMPO make COD digester outer cabinet made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. An aluminium block with holes (dimension 40 mm dia x 80 mm depth) is used to hold COD tubes. The aluminium block is heated to maintain the temperature up to 180°C. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range Above ambient to 180°C Resolution […]
- [Corto Fluid Dispenser](https://tempoinstruments.com/corto-fluid-dispenser/): Series TI-128HT The ‘CORTO’ Glass Syringe Pump is a Repetitive dispenser for fluid transfer that facilitates repeatable dosage distribution. The System offers a user-friendly design for the fluid transfer – without the capital investment required for filling pumps. The device is for use with a wide variety of reservoirs, including vials, syringes, oral medication containers. Also used for drug dosage distribution and reconstitution in hospital pharmacies. CORTO’ Glass Syringe Pipettors, have contoured finger rings and thumb rest that allows effortless non-fatiguing one-handed operation. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside […]
- [Leak Test Apparatus](https://tempoinstruments.com/leak-test-apparatus/): Series TI-128HT This apparatus is an ideal instrument to check the sealing integrity of the blister packs, strip packs, sachet and pouch packs etc. It is also used for checking leaks from capped bottles, induction sealed containers, sealed or crimped containers etc. The leak test apparatus in a stainless steel body with phenomenal compactness. The instrument is equipped with a long-lasting vacuum pump, which gives a higher level of vacuum in the shortest possible time. Die pressed polycarbonate vacuum desiccator sustain vacuum for a long time Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. […]
- [Lab Clean Unique Filter Combination](https://tempoinstruments.com/lab-clean-unique-filter-combination/): “TEMPO” make lab clean is a carefully enclosed machine which is a unique filter combination that filters our air and gas contaminants thus by giving most clean air. The air is drawn through the prefilter, carbo filter and HEPA filter and blown clean air in the room. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 50°C to 400°C Temperature accuracy ±0.5°C Temperature uniformity ±10°C Supply 230V, AC / 415 V,AC 50°C to 400°C ±0.5°C […]
- [Dynamic Pass Box](https://tempoinstruments.com/dynamic-pass-box/): Series TI-80 Dynamic pass box equipment made of powder-coated high-grade stainless steel (304/316) with international quality standard components including electrically interlocked doors and UV light. These dynamic pass box equipment are equipped with a prefilter of 5 microns and box type HEPA filter of 99.99% to 0.3 microns. Standard Models Inside mild steel with silver heat resistant paint and outer mild steel with Hammerton paint. Inside SS 304 mirror finish and outer mild steel with Hammerton paint. GMP Models Inside SS 304 with mirror polish & outer stainless steel 304 with a matt finish. Inside SS 316 with mirror polish […]
- [Static Pass Box](https://tempoinstruments.com/static-pass-box/): Series TI-80 Static pass box equipment is made of high-grade stainless steel (304/316) with international quality standard components including electrically interlocked. This pass box is designed to minimize traffic and contamination entry into the clean room. Enables parts, tools and other items to be passed to and from the room. This pass box unit acts as an airlock device preventing ambient air from entering or clean air from exiting from the clean room. Standard Models Inside mild steel with silver heat resistant paint and outer mild steel with Hammerton paint. Inside SS 304 mirror finish and outer mild steel with […]
- [Soxhlet Extraction Apparatus](https://tempoinstruments.com/soxhlet-extraction-apparatus/): “TEMPO” make soxhlet extraction heaters are designed to use in laboratories for solvent extraction under reflux. Typical applications are the determination of residual oil content in oil cake, assay of crude herbal drug sources etc. Standard Models Inside mild steel with silver heat resistant paint and outer mild steel with Hammerton paint. Inside SS 304 mirror finish and outer mild steel with Hammerton paint. GMP Models Inside SS 304 with mirror polish & outer stainless steel 304 with a matt finish. Inside SS 316 with mirror polish & outer stainless steel 304 with a matt finish. Specification Max surface temp […]
- [Tray Dryer](https://tempoinstruments.com/tray-dryer/): “TEMPO” make a tray dryer are with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air which ensures a homogeneous hot air mixture and an exact temperature profile. Standard Models Inside mild steel with silver heat resistant paint and outer mild steel with Hammerton paint. Inside SS 304 mirror finish and outer mild steel with Hammerton paint. GMP Models Inside SS 304 with mirror polish & outer stainless steel 304 with a matt finish. Inside SS 316 with mirror polish & outer stainless steel 304 with a matt finish. Specification Temperature […]
- [Lab Precision Oven with Glass Window on Door](https://tempoinstruments.com/lab-precision-oven-with-glass-window-on-door/): Series TI-710 “TEMPO” make hybridization oven are with the forced air circulation provided by means of the motorized blower on the backside of the oven for recirculation of air which ensures a homogenous hot air mixture and exact temperature control. Standard Models Inside SS with mirror polish & outside mild steel powder coated. GMP Models Inside SS with mirror polish & outside stainless steel with the dull buff finish. Specification Temperature range  5°C above ambient to 100°C Temperature accuracy ±0.5°C Temperature uniformity ±1°C Speed controller digital Speed 50 rpm to 60 rpm Supply 230V, AC  5°C above ambient to 100°C […]
- [Hybridization Oven](https://tempoinstruments.com/hybridization-oven/): Series TI-710 “TEMPO” make hybridization oven are with the forced air circulation provided by means of the motorized blower on the backside of the oven for recirculation of air which ensures a homogenous hot air mixture and exact temperature control. Standard Models Inside SS with mirror polish & outside mild steel powder coated. GMP Models Inside SS with mirror polish & outside stainless steel with the dull buff finish. Specification Temperature range 5°C above ambient to 100°C Temperature accuracy  ±0.5°C Temperature uniformity ±1°C Speed controller 5% Rh above ambient to 90% Rh Speed 50 rpm to 60 rpm Supply 230V, […]
- [Humidity Oven](https://tempoinstruments.com/humidity-oven/): Series TI-701 “TEMPO” make humidity ovens are manufactured and design for electrical & electronic industries for testing components and equipment as per ISO 9000:2015 Testing cement, batteries, cigarettes, or any other material demanding controlled temperature & humidity. It is also used in industries like pharmaceutical for accelerating ageing, food & beverage, packing, department of botany, cytology, plant & animal breeding. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C above ambient to 60°C […]
- [High Temperature Oven 450°C](https://tempoinstruments.com/high-temperature-oven-450c/): Series TI-128HT “TEMPO” make TI – 128HT series ovens are made of triple-walled construction. The motorized blower with V-belt fitted on the top side of the chamber for re-circulation of air to maintain the uniformity of temperature inside the chamber. The unit is insulated with 4” high grade glass wool. Single door fitted on heavy hinges. The unit is provided with user friendly adjustable stainless steel rod mesh trays.   Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff […]
- [High Temperature Oven 400°C](https://tempoinstruments.com/high-temperature-oven-400c/): Series TI-128HT “TEMPO” make TI – 128HT series ovens are made of triple-walled construction. The motorized blower with V-belt fitted on the top side of the chamber for re-circulation of air to maintain the uniformity of temperature inside the chamber. The unit is insulated with 4” high grade glass wool. Single door fitted on heavy hinges. The unit is provided with user friendly adjustable stainless steel rod mesh trays. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff […]
- [Lab Drying Oven](https://tempoinstruments.com/lab-drying-oven/): Series TI-121 “TEMPO” make lab drying TI ‐ 126 series ovens with forced air draft provided by means of blower fitted at the bottom of the oven. There is no re‐circulation of air. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 50°C to 250°C Temperature accuracy ±0.5°C Supply 230V, AC 50°C to 250°C ±0.5°C 230V, AC Construction Ovens are made of double walled construction. The unit is insulated with 3” thick high grade […]
- [Lab Precision Oven 300°C](https://tempoinstruments.com/lab-precision-oven-300c/): Series TI-121 “TEMPO”make lab precision ovens are provided with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air to maintain the uniformity of temperature inside the chamber.   Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range  5°C above ambient to 300°C Temperature accuracy  ±0.2°C Temperature uniformity ±2°C Supply 230V, AC  5°C above ambient to 300°C  ±0.2°C ±2°C 230V, AC Construction Ovens are made of […]
- [Lab Precision Oven 250°C](https://tempoinstruments.com/lab-precision-oven-250c/): Series TI-128 Hot air ovens use dry heat sterilization. “TEMPO” make lab precision oven (hot ait oven) uses forced air circulation method to get the desired temperature profile. In the dry heat sterilization process, the material used for heating has the characteristics of a high melting point and it will not catch fire or changes its form while heating at a higher temperature. To ensure the homogeneous hot air mixture inside the oven, a motorized blower is fitted on the top of the chamber which ensures the exact temperature inside the chamber.  Standard Models Inner chamber made of stainless steel (SS304) mirror […]
- [Natural Convection Oven](https://tempoinstruments.com/natural-convection-oven/): Series TI-121 Natural convection ovens are ideal for sterilization, drying, and thermal storage tasks which do not require high drying rates or special time parameters. These ovens are made of double walled construction. The unit is insulated with 3” thick high grade glass wool insulation. Single door is tted on heavy duty hinges. The unit is provided user friendly adjustable stainless steel rod trays. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C […]
- [Multicell Aging Oven](https://tempoinstruments.com/multicell-aging-oven/): “TEMPO” make Multicell Ageing Oven suitable for ageing test of PVC & rubber as per BS 903 part A 19 method A for rubber. BS 6746 (1976) method E for PVC. It confirms to IS 3400 (Part IV) 1978. Specification No of cells 7 cells to 19 cells Wattage 3kW/6kW Temperature Range 5°C above ambient to 150°C Temperature Accuracy ±1°C within the cell Temperature Variation ±1°C cell to cell Cell Dimension  75 mm diameter × 305 mm height Supply 230V, AC 7 cells to 19 cells 3kW/6kW 5°C above ambient to 150°C ±1°C within the cell ±1°C cell to cell […]
- [Vacuum Oven](https://tempoinstruments.com/vacuum-oven/): “TEMPO” make vacuum oven are designed & manufactured to comply with the requirements of the industry. It is widely applicable for drying & sterilization in fields of biochemistry, pharmacy, medicine, health, agriculture & scientific research and environment protection. It is designed especially for the drying of material which is thermos ‐ sensitive or decompounded and oxidative easily. Standard Models Inside SS 304 with mirror polish & outer made from mild steel (CRCA) with powder coated. GMP Models Inside SS 316 with mirror finish and outside made from SS 304 with the dull buff finish. Specification Temperature range 50°C to 200°C Temperature […]
- [Deep Freezer -40°C](https://tempoinstruments.com/deep-freezer-40c/): Series TI-820 “TEMPO” make deep freezer are designed to provide an ideal freezing environment for advanced medical and industrial applications and also suitable for Research Laboratories, Blood Bank, Biological Use includes preservation of plasma, blood components, vaccines, etc. These units are available in horizontal/vertical versions. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range -40°C Temperature accuracy  ±3°C Supply 230V, AC -40°C  ±3°C 230V, AC Construction Double walled construction 3” thick PUF insulation ensures stable temperature with […]
- [Deep Freezer -20°C](https://tempoinstruments.com/deep-freezer-20c/): Series TI-820 “TEMPO” make deep freezer are designed to provide an ideal freezing environment for advanced medical and industrial applications and also suitable for research laboratories, blood bank, biological use includes preservation of plasma, blood components, vaccines, etc. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range  -20°C Temperature accuracy  ±3°C Supply 230V, AC  -20°C  ±3°C 230V, AC Construction Double walled construction. 3” Thick PUF Insulation ensures stable temperature with reduced energy consumption. Features Full […]
- [Glass Door Refrigerator](https://tempoinstruments.com/glass-door-refrigerator/): Series TI-810 “TEMPO” make glass door refrigerators are stable and reliable with the refrigerated environment for exact laboratory requirements. Lab refrigerators are used for maintaining storage conditions of a product, to prevent its exposure to low temperature applications, where the temperature requirements are on the lower side. Ideal temperature environment for clinical research, pharmaceutical and industrial use. Adjustable shelves and wide range set point for varying laboratory applications including chromatography and pharmaceutical storage. The application includes refrigerated storage of vaccines, reagents, cultures, medicines and blood samples. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP […]
- [Laboratory Refrigerator](https://tempoinstruments.com/laboratory-refrigerator/): Series TI-810 “TEMPO” lab refrigerator is made of double walled construction with thick high grade PUF insulation. Full view inner acrylic door & front door with gasket & locking arrangement. The motorized blower at the backside of the chamber develops a unique airflow system to maintain uniform temperature condition inside the chamber. Unique airflow assures quick recovery after door openings. The unit is provided with a user friendly adjustable specially designed S.S rod trays, ensures uniform temperature distribution. The equipment is mounted on castor wheels for easy movement. Standard Models Inside S.S. 316 with mirror polish & Outside stainless steel […]
- [Bacteriological Incubator](https://tempoinstruments.com/bacteriological-incubator/): Series TI-90 “TEMPO” make bacteriological incubator are specially designed for research laboratories, engineering lab, pharmaceutical lab, cosmetic industry, chemical lab, clinical lab, microbiological determination, pharmaceutical stability assays, food processing, QC, etc. Standard Models Inside SS 304 with mirror polish & outside mild steel duly powder coated. Inner – Outer SS304 Inside SS 304 & outside SS304 GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 5°C above ambient to 80°C Temperature accuracy ±0.2°C Supply 230V, AC 5°C above ambient to 80°C ±0.2°C 230V, AC Construction “TEMPO” make bacteriological incubator are […]
- [BOD Incubator](https://tempoinstruments.com/bod-incubator/): Series TI-500 “TEMPO” make BOD incubators are manufactured to comply requirement of industries. Specifically designed for the long term and stable continuous operation ideal for pharmaceuticals, biotechnology and research institutions for storage and incubation studies. Incubators to provide a condition for optimal growth of microbiology cultures, biological labs for the preservation of vaccines, serological and complement fixation tests, General low temperature uses in physical /chemical labs, R&D centre, quality control laboratory, general laboratories of industries, pharmaceuticals, chemicals, petrochemicals, oil & gas, cement, pulp and paper, fertilizers, defence, railways, paint etc… Standard Models Inside S.S. 304 with mirror polish & Outside mild steel powder […]
- [Walk in Bacteriological Incubator](https://tempoinstruments.com/walk-in-bacteriological-incubator/): Series TI-90 When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 20°C to […]
- [Walk in BOD Incubator](https://tempoinstruments.com/walk-in-bod-incubator/): Series TI-500 When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 20°C to […]
- [Walk in Lab Refrigerator](https://tempoinstruments.com/walk-in-lab-refrigerator/): Series TI-810 When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range  2°C to […]
- [Walk in Stability Chamber](https://tempoinstruments.com/walk-in-stability-chamber/): Series TI-710 When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data. Standard Models Inside S.S. 304 with mirror polish & outside mild steel powder coated. GMP Models Inside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 20°C to […]
- [Stability Humidity Chamber](https://tempoinstruments.com/stability-humidity-chamber/): Series TI-710 Whether your testing is for R&D, clinical trials or ongoing stability, the “TEMPO” stability chamber provide a stable temperature & humidity condition environment for worry-free operations with a control system that is easy to operate. “TEMPO” make stability chamber is designed as per ICH guidelines and are manufactured to comply with requirements in the industries. Stability testing is an integral part of formulation development. It helps to generate information, which permits well-considered proposals to be made for the shelf life of drug substances and products and recommended storage conditions. The purpose of stability testing is to provide evidence on how the quality […]
- [Photostability Chamber](https://tempoinstruments.com/photostability-chamber/): Series TI- 710 “TEMPO” make photostability chamber is used for confirmatory studies, the samples should be exposed to light providing an overall illumination of not less than 1.2 million lux hours and an integrated near ultraviolet energy of not less than 200 watt hours/square meter to allow direct comparison to be made between drug substance & drug product. Standard Models Inside SS 304 with mirror polish & outside mild steel powder coated. GMP Models Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish. Specification Temperature range 20°C to 50°C Temperature accuracy ±0.2°C Temperature […]
- [Stability Chamber](https://tempoinstruments.com/stability-chamber/): Series TI-710 Whether your testing is for R&D, clinical trials or ongoing stability, “TEMPO” stability chamber provide a stable temperature & humidity condition environment for worry-free operations with a control system that is easy to operate. “TEMPO” make stability chamber is designed as per ICH guidelines and are manufactured to comply with requirements in the industries. Stability testing is an integral part of formulation development. It helps to generate information, which permits well-considered proposals to be made for the shelf life of drug substances and products and recommended storage condition. The purpose of stability testing is to provide evidence on how the quality of […]
- [Testimonial](https://tempoinstruments.com/testimonial/): Call US: 9820464003 9820840572 Location: Top Syringe Compound, W.E Highway, Pandurang Wadi,Mira Road, Mumbai Email Us: enquiry@tempo.net.in
- [My account](https://tempoinstruments.com/my-account/)

## Products

- [Stability Chamber](https://tempoinstruments.com/product/stability-chamber/): The stability chamber is used for confirmatory studies. The sample is exposed to light the allows the direct comparison between the substance.
- [V Shape Pennant](https://tempoinstruments.com/product/v-shape-pennant/): Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum and tortor an umbrella feugiat vitae ultricies eget tempor sit amet ante. Donec eu libero sit amet quam egestas then semper. Aeneano ultricies mi vitae est. Mauries placerat eleifend leon of the lorem ipsum text. This is the same product short description with lorem ipsum text.


[comment]: # (Generated by Hostinger Tools Plugin)