Series TI-121
Hot air ovens use dry heat sterilization. “TEMPO” make lab precision oven (hot ait oven) uses forced air circulation method to get the desired temperature profile. In the dry heat sterilization process, the material used for heating has the characteristics of a high melting point and it will not catch fire or changes its form while heating at a higher temperature. To ensure the homogeneous hot air mixture inside the oven, a motorized blower is fitted on the top of the chamber which ensures the exact temperature inside the chamber.
Standard Models
Inner chamber made of stainless steel (SS304) mirror finish and outer GI duly powder coated.
GMP Models
Inner chamber made of stainless steel (SS304) mirror finish and outer GI duly powder coated.
Specification
Temperature range
5°C above ambient to 250°C
Temperature accuracy
±0.2°C
Temperature uniformity
±1°C
Supply
230V, AC
Hot Air Oven Construction
Features
- Single door fitted on the heavy cast and chromium-plated hinges with spring and roller type latch with an asbestos gasket to avoid heat loss. Specially designed stainless steel rod trays ensure uniform temperature distribution.
Safety Features
- Safety standby thermostat to cut off the heater supply in case of overshoot of temperature.
Technical Specification
Controlling System
Imported microprocessor-based autotune PID controller with CE mark and dual display of set value and process value.
Heater
SS tubular heating elements used on sidewalls to maintain uniform condition inside the chamber.
Air Circulation
Motorized blower on the top side of the chamber develops a unique airflow system which ensures maximum uniform temperature distribution inside the chamber. The unique airflow ensures that there is a quick recovery after the doors are opened.
Optional Features
- Data logger
- Data scanner complete with sensor
- CFR 21 part 11 compliance software for data logger/scanner
- Safety digital temperature controller
- Timer
| Models | Capacity (litres) | Inner Dimensions
H × W × L (cm) | Trays |
|---|---|---|---|
| TI – 128 A | 43 | 35 × 35 × 35 | 2 |
| TI – 128 B | 91 | 45 × 45 × 45 | 2 |
| TI – 128 C | 122 | 60 × 45 × 45 | 3 |
| TI – 128 D | 216 | 60 × 60 × 60 | 3 |
| TI – 128 E | 325 | 90 × 60 × 60 | 4 |