“TEMPO” make Multicell Ageing Oven suitable for ageing test of PVC & rubber as per BS 903 part A 19 method A for rubber. BS 6746 (1976) method E for PVC. It confirms to IS 3400 (Part IV) 1978.
Specification
No of cells
7 cells to 19 cells
Wattage
3kW/6kW
Temperature Range
5°C above ambient to 150°C
Temperature Accuracy
±1°C within the cell
Temperature Variation
±1°C cell to cell
Cell Dimension
75 mm diameter × 305 mm height
Supply
230V, AC
Construction
Solid cast aluminum main body.
Features
- Safety cum stand by a thermostat to cut off the Heater supply in case of temperature overshoot.
- Diaphragm pump at bottom of the chamber develops unique preheated airflow system which ensures maximum uniform temperature condition inside each cell changes per hour through all the cells. Rotameter with needle value to control the rate of flow of air. A small brushless diaphragm pump, no chance of generating ozone. Airflow is regulated through a rotameter of suitable range. The unit is supplied with castor wheels for ease of movement. Supplied complete with a diaphragm pump, rotameter & air filter. Each cell is provided with a double lid.
Technical Specification
Controlling System
Imported microprocessor based autotuned PID controller with CE mark & dual display of set value & process value for precise control of temperature.
Thyristor Drive
An additional Thyristor Circuit reduces energy consumption with results into decrease in electricity bills.
Models & Optional Features
| Models | Capacity (litres) | Internal Dimensions H × W × D (cm) | Trays |
|---|---|---|---|
| TI – 831 S / G | 100 | 50 × 50 × 40 | 2 |
| TI – 832 S / G | 170 | 70 × 60 × 40 | 2 |
| TI – 833 S / G | 200 | 60 × 60 × 60 | 2 |
| TI – 834 S / G | 285 | 80 × 60 × 60 | 3 |
| TI – 835 S / G | 325 | 90 × 60 × 60 | 4 |