Series TI-610
“TEMPO” make MBRT water bath are made of double wall construction.
Standard Models
Inside SS 304 with mirror polish & outside mild steel powder coated.
GMP Models
Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.
Specification
Temperature range
5°C above ambient to 98°C
Construction
“TEMPO” made MBRT water bath are made up of the double wall. The interior is made from SS 304 an exterior from MS duly powder coated. The temperature is controlled by means of PID controller cum indicator.
Features
- Lower water level cut off system
- Flat lid
- Pyramidal lid
- Test tube rack to hold 30 test tubes
- Stirring mechanism
Technical Specification
- Controlling System
Digital temperature controller cum indicator with PT – 100 sensor. (available from 4.5 litres onwards).
- Timer
Digital Timer : 0 minutes – 20 minutes for 1 litre to 3 litres
: 0 – 99 minutes for 4.5 litres capacity onwards
- Transducer
Imported PZT sandwich type bonded at the bottom of the tank.
Features
- Safety temperature controller
- Low water level indicator
- Timer with alarm
- European plug
- Stainless Steel water drainage
- IP20 protection for control panel
- Drain for water supply
- Inlet nozzle for water filling
Safety Features
Compressor ON delay timer to safe guard the compressor.
Features
- High frequency built in MOSEFT based SMPS.
- Fully Stainless Steel body.
- Top mounted removable lid with a basket (no lid in 1 litre capacity)
- Drain system with ball valve (available for 4.5 litres capacity onward)
Optional Features
- Safety digital temperature controller
- Timer
Models & Optional Features
| Models | Capacity (litres) | Internal Dimensions L × W × H (cm) |
|---|---|---|
| TI – 160 A | 14 | 40 × 20 × 18 |
| TI – 160 B | 25 | 40 × 35 × 18 |
| TI – 160 C | 35 | 55 × 35 × 18 |