Series TI-58
“TEMPO” make muffle furnace are designed and manufactured to comply with the requirements of laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc. “TEMPO” make a muffle furnace in a horizontal/rectangular model. Insulation is provided with high-grade insulation material.
Standard Models
Outside mild steel with hammertone paint
GMP Models
Outside stainless steel 304
Temperature range
1200°C continuous
Supply
Single phase
Specification
Optional Features
- Data logger
- CFR 21 part 11 compliance software for data logger
- Safety digital temperature controller
- Timer
Features
- Maximum operating temperature range up to 1800°C
- Dimensions from 1 up to 64 litres.
- Compact design for minimum space requirement.
- Rugged and durable Construction.
- Outer casing is made up thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life with extremely resistant.
- Multilayer insulation with vacuum formed ceramic fibre or refractory bricks with low thermal mass.
- Reliable vibration free bottom lifting with electro-mechanical movement
- Prepared to carry heavy charge weight.
- Hot raising by hydraulic.
- Furnace design with powerful heating elements i.e. FeCrAl, SiC and MoSi2 installed in four walls of the chamber
- providing fast heating rate and excellent temperature uniformity.
- Fast heat up and cool down rates.
- Temperature uniformity +/- 5°C.
- Temperature control with PID controllers.
- Power control with solid state relays or Thyristor units
- for very precise temperature Control, wear-free and noiseless.
- High mechanical durability, short heating cycle and low power consumption.
Optional Features
- Over Temperature/Over Current Limiter.
- Touchscreen temperature controller.
- Port for additional thermocouple on top or rear wall of the furnace.
- Buzzer, Digital timer, Emergency shut down.
- Data Recorder.
- RS232/RS485/USB interface.
- Calibration of temperature measurement systems.
- Table/Stand for supporting the systems.
- Data Acquisition System (DAS) through software.
- UPS Systems.
- Customization as per user requirement.
- Caster wheels with brakes.
- Door safety switch.
Technical Specification
Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Optional Features
- CFR 21 part 11 compliance software for data logger
- Data logger
- Data scanner complete with sensor
- Safety digital temperature controller
- Timer
| Models | Rating (kW) | Internal Dimensions H × W × D (cm) | Supply |
|---|---|---|---|
| TI – 58 HTA | 1.8 | 23 × 10 × 10 | 230V, AC |
| TI – 58 HTB | 3.5 | 30 × 15 × 15 | 230V, AC |
| TI – 58 HTC | 3.5 | 30 × 20 × 20 | 230V, AC |
| TI – 58 HTD | 7 | 45 × 22.5 × 22.5 | 230V, AC |