Series TI-58
“TEMPO” make shell laboratory furnace are designed and manufactured to comply with requirements for laboratory and industrial applications. It is used for engineering tests of soils and aggregates, cement testing, ashing organic and inorganic samples, gravimetric analysis, ignition tests, etc. “TEMPO” make laboratory furnaces are constructed in the horizontal or rectangular model. The insulation is provided with high grade insulation material.
Standard Models
Inner made of a ceramic pot, Outer case made from thick gauge mild steel (CRCA) sheet.
GMP Models
Inner made of a ceramic pot, the outer case made from thick gaug stainless steel (SS304)
Max temperature
1150°C continuous (max 1200°c)
Specification
Optional Features
- Data logger
- CFR 21 part 11 compliance software for data logger
- Safety digital temperature controller
- Timer
Features
- Maximum operating temperature range up to 1800°C
- Dimensions from 1 up to 64 litres.
- Compact design for minimum space requirement.
- Rugged and durable Construction.
- Outer casing is made up thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life with extremely resistant.
- Multilayer insulation with vacuum formed ceramic fibre or refractory bricks with low thermal mass.
- Reliable vibration free bottom lifting with electro-mechanical movement
- Prepared to carry heavy charge weight.
- Hot raising by hydraulic.
- Furnace design with powerful heating elements i.e. FeCrAl, SiC and MoSi2 installed in four walls of the chamber
- providing fast heating rate and excellent temperature uniformity.
- Fast heat up and cool down rates.
- Temperature uniformity +/- 5°C.
- Temperature control with PID controllers.
- Power control with solid state relays or Thyristor units
- for very precise temperature Control, wear-free and noiseless.
- High mechanical durability, short heating cycle and low power consumption.
Optional Features
- Over Temperature/Over Current Limiter.
- Touchscreen temperature controller.
- Port for additional thermocouple on top or rear wall of the furnace.
- Buzzer, Digital timer, Emergency shut down.
- Data Recorder.
- RS232/RS485/USB interface.
- Calibration of temperature measurement systems.
- Table/Stand for supporting the systems.
- Data Acquisition System (DAS) through software.
- UPS Systems.
- Customization as per user requirement.
- Caster wheels with brakes.
- Door safety switch.
Technical Specification
Temperature Control
The temperature is controlled by means of imported microprocessor based autotuned PID controller to avoid overshoot. CE marked and a dual display for set value and process value.
Construction
Heating is effected by means of the element made of the best quality Nichromewire wounded on the muffle.
Insulation: Heating element wounded with high-grade cerewool blanket and gaps are filled with suitable insulating material. The single door made of brickwork and cementing fitted in with a single hole at the centre. The shell is provided with an air gap for low body temperature.
| Models | Rating (kW) | Internal Dimensions H × W × D (cm) | Max Continous
Temp (°C) |
|---|---|---|---|
| TI – 59 HTA | 1.8 | 10 × 10 × 23 | 1150 |
| TI – 59 HTB | 3.5 | 15 × 15 × 30 | 1150 |
| TI – 59 HTC | 3.5 | 20 × 20 × 30 | 1150 |
| TI – 59 HTD | 7 | 22.5 × 22.5 × 45 | 1150 |