Series TI-820
“TEMPO” laboratory furnaces are designed for higher temperature applications. The design is based on the highest standards for quality with efficient high-temperature use and minimal maintenance. Silicon carbide element with easy assembly. These lab furnaces are Ideal for rapid cycling over extended periods.
The advance design feature provides fast heat up and recovery with excellent uniformity and energy efficiency, increased resistance to thermal shock, ideal for rapid cycling over extended periods.
Temperature range
1300°C max (1250°C continuous)
Supply
Single phase/three phase
Standard Models
Outside mild steel with hammertone paint
GMP Models
Outside stainless steel 304
Specification
Construction
This laboratory muffle furnace is designed to operate under high temperature with minimal maintenance and higher efficiency. The high-temperature ceramic fibre insulation with an advanced graded design ensures fast heat-up time and resistance to the thermal shock. The natural cooling of the outer surface reduces exterior shell temperatures and improve energy efficiency and operator safety.
The thermocouples compensated lead wire and polarized plug for measures accurate high-temperature with a longer self-life. Removable panels for easy access to replaceable heating elements and thermocouples. The heating is achieved by silicon carbide element with easy mounting and assembly.
Technical Specification
- Temperature Control
The temperature is controlled by means of an imported microprocessor-based autotuned PID controller to avoid overshoot. CE marked and a dual display for set value and process value.
Optional Features
- CFR 21 part 11 compliance software for data logger
- Safety digital temperature controller
- Data logger
- Timer
Technical Specification
Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Optional Features
- CFR 21 part 11 compliance software for data logger
- Data logger
- Data scanner complete with sensor
- Safety digital temperature controller
- Timer
| Models | Rating (kW) | Internal Dimensions H × W × D (cm) | Supply |
|---|---|---|---|
| TI – 61 HTA | 4.1 | 10 × 10 × 23 | 1 ph, N, 230V, 2 wire, 4.3KW |
| TI – 61 HTB | 4.6 | 15 × 15 × 30 | 1 ph, N, 230V, 415 volts, 4 wire, 6.3KW |
| TI – 61 HTC | 5.2 | 20 × 20 × 30 | 1 ph, N, 230V, 415 volts, 4 wire, 6.3KW |
| TI – 61 HTD | 8 | 22.5 × 22.5 × 45 | 3 ph, N, 415 volts, 4 wire, 8KW |