Series TI-820
Temperature range
1700°C max
Supply
Single phase/three phase
Standard Models
Inside and outside are made of SS 304
GMP Models
Inside SS 316 & outside stainless steel 304
“TEMPO” make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc.
Specification
Application
Muffle Furnace is designed for R&D labs, Educational institutions , Medicine and Industry, Chemical Industries, Plastic Industry, Moulding Industry, Glass Industry, Rubber Industry, Ceramics Industry, Biomedical Industry, Paint Industry, Textile Materials, Pharma Industry, Dental Labs, Thermal Process Technology, Advanced Materials for following applications, Testing, Analysing, Ashing, Drying, Sintering, Annealing, Melting, Tempering, Hardening, Dental Porcelain, and Crystalizing etc.
Features
- Maximum operating temperature range up to 1700°C.
- Dimensions from 1 up to 200 litres.
- Rugged and durable construction.
- The outer casing is made up of thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life with
extremely resistant. - Multiplayer insulation with vacuum formed ceramic fibre or refractory bricks with low thermal mass.
- Parallel guided swing aside door design.
- Furnace design with powerful heating elements i.e. FeCrAl, SiC and MoSi2 on both sides providing a fast heating rate.
- Fast heat up and cool down rates.
- Temperature uniformity +/- 5°C.
- Temperature control with PID controllers.
- Power control with solid-state relays or Thyristor units for very precise temperature Control, wear-free and noiseless.
- High mechanical durability, short heating cycle and low power consumption.
Optional Features
- Over Temperature/Over Current Limiter
- Touchscreen temperature controller
- Port for additional thermocouple.
- Process observation window.
- Chimney for forced air extraction.
- Additional ceramic/SiC bottom plate.
- Buzzer, Digital timer, Emergency shut down.
- Data Recorder.
- RS232/RS485/USB interface.
- Calibration of temperature measurement systems.
- Gas purging facility Table for supporting the systems.
- Data Acquisition System (DAS) through software.
- UPS Systems.
- Customization as per user requirement.
- Caster wheels with brakes.
- Door safety switch.
Technical Specification
Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Optional Features
- CFR 21 part 11 compliance software for data logger
- Data logger
- Data scanner complete with sensor
- Safety digital temperature controller
- Timer
| Models | Rating (kW) | Internal Dimensions H × W × D (cm) | Supply |
|---|---|---|---|
| TI – 63 HTA | 4.5 | 10 × 10 × 23 | 1 ph, N, 230V, 50Hz |
| TI – 63 HTB | 5.1 | 15 × 15 × 30 | 3 ph, N, 440V, 50Hz |
| TI – 63 HTC | 5.5 | 20 × 20 × 30 | 3 ph, N, 440V, 50Hz |
| TI – 63 HTD | 10.7 | 22.5 × 22.5 × 45 | 3 ph, N, 440V, 50Hz |