Series TI- 710
Standard Models
Inside SS 304 with mirror polish & outside mild steel powder coated.
GMP Models
Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.
Specification
Temperature range
20°C to 50°C
Temperature accuracy
±0.2°C
Temperature uniformity
±1°C
Humidity Range
40% Rh to 90% Rh
Humidity Accuracy
±2%Rh
Humidity Uniformity
±3%Rh
Supply
230V, AC
Construction
“TEMPO” make photostability chamber are made of double walled construction with backside as triple walled. The fluorescent light & UV light fitted on the top side of the chamber. Full view inner tough glass door & a front door with magnetic gasket & lock. The motorized blower is fitted on the backside for uniform temperature & humidity. The 3” thick PUF insulation to ensure stable temperature & humidity. The unit is provided with the adjustable stainless steel rod trays. The equipment is mounted on caster wheel for easy movement.
Features
- 50 mm validation porthole with silicon rubber seal to insert sensors for validation. Full view observation acrylic door with a gasket to observe the sample inside the chamber. Interior illumination for working area. Specially designed stainless steel rod trays ensure uniform temperature distribution.
Safety Features
- Additional safety thermostat to cut of dry heater supply in case temperature of overshoot. Float switch to cut off the wet heater supply in case of low water level. Audio & visual alarm. Compressor ON delay timer (2 min.) to safeguard the compressor. Inbuilt overload protector provided for a hermetically sealed compressor. After opening the door UV light is automatically switch off.
Technical Specification
Controlling System
Two separate imported microprocessors based autotune PID controller with CE mark & dual display of set value & process value for temperature & humidity with direct %RH.
Air Circulation
The motorized blower at the backside of the chamber develops a unique air ow system which ensures maximum uniform temperature and humidity condition inside the chamber.
Heating System
High quality U shape SS tubular heater is used for better heating.
Humidity System
Steam injection system (non-condensing type) and reservoir tank with water level arrangement with indicator.
Refrigeration System
CFC Free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (eco friendly) refrigerant with a time delay to safeguard compressor system.
Optional Features
- PLC for auto change over for standby refrigeration system with HMI
- CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication
- Stand by refrigeration and humidity system
- Data logger
- CFR 21 part 11 compliance software for data logger
- Data scanner complete with sensor
- SMS mobile alert system
- Door access security system
- Safety digital temperature controller
- Timer
| Models | Capacity (litres) | Internal Dimensions H × W × D (cm) | Trays |
|---|---|---|---|
| TI – 910 S / G | 120 | 50 × 60 × 40 | 1 |
| TI – 911 S / G | 170 | 70 × 60 × 40 | 1 |
| TI – 912 S / G | 200 | 60 × 60 × 60 | 1 |
| TI – 913 S / G | 285 | 80 × 60 × 60 | 2 |
| TI – 914 S / G | 325 | 90 × 60 × 60 | 2 |