Series TI-125
“Tempo” make Radial Locking Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc
GMP Models
Inside SS 316 & outside stainless steel 304
Standard Models
Inside and outside are made of SS 304
Specification
Temperature range
121oC to 125oC
Pressure range
15 to 22 PSI
Factory set
15 PSI at 121oC
Supply
230 Volt, AC, Single Phase, 50Hz
Construction
Features
2 no safety high pressure release valve.
Safety Features
Compressor ON delay timer to safe guard the compressor.
Technical Specification
Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater’s safety.
Optional Features
- CFR 21 part 11 compliance software for data logger
- Data logger
- Data scanner complete with sensor
- Safety digital temperature controller
- Timer
| Models | Capacity (litres) | Internal Dimensions Dia × Height (cm) | Rating (kW) |
|---|---|---|---|
| TI – 125 RLB | 35 | 30 x 50 | 2.0 |
| TI – 125 RLC | 53 | 35 × 55 | 3.0 |
| TI – 125 RLD | 95 | 45 × 60 | 4.0 |
| TI – 125 RLE | 119 | 45 × 75 | 4.5 |
| TI – 125 RLF | 178 | 55 × 75 | 6.0 |