Features
- Maximum operating temperature range up to 1500°C.
- Available in, Horizontal operation, Vertical operation, universal operation.
- Furnace split into two halves.
- Split design allows to insert tubes with large flanges.
- Accelerate cooling of furnace and tube by opening hinges casing.
- Compact design for minimum space requirement.
- Rugged and durable Construction.
- Outer casing is made up thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life with extremely resistant.
- Multiplayer insulation with vacuum formed ceramic fiber or refractory bricks with low thermal mass.
- Alumina/Quartz/Metal tube with two fiber plugs included.
- Inner diameter of the tube from 20 mm to 150 mm.
- Heated Length from 100 mm to 1000 mm.
- Furnace design with powerful heating elements i.e. FeCrAl, and SiC in all sides of the work tube providing fast heating rate.
- Fast heat up and cool down rates.
- Temperature uniformity +/- 5°C.
- Temperature control with PID controllers.
- Power control with solid state relays or Thyristor units
- for very precise temperature Control, wear-free and noiseless.
- High mechanical durability, short heating cycle and low power consumption.
Optional Features
- Multi-zone temperature control.
- Touchscreen temperature controller.
- Over Temperature Limiter.
- Vacuum pump with fittings.
- Gas and Vacuum Compatible Flanges, Water cooled flanges with chiller.
- Door flanges with hinges.
- Gas mixing system.
- Digital/Analog flow meters.
- Port for additional thermocouple on the flange.
- Process observation window on flange.
- Buzzer, Digital timer, Emergency shut down.
- Data Recorder.
- RS232/RS485/USB interface.
- Calibration of temperature measurement systems.
- Table/Stand for supporting the systems.
- Data Acquisition System (DAS) through software.
- UPS Systems.
- Customization as per user requirement.
- Caster wheels with brakes.
- Door safety switch.
Models & Optional Features
Models | Rating (kW) |
Internal Dimensions H × W × D (cm) |
Supply |
---|---|---|---|
TI – 62 HTA | 4.5 | 10 × 10 × 23 | 1 ph, N, 230V, 50Hz |
TI – 62 HTB | 5.1 | 15 × 15 × 30 | 3 ph, N, 440V, 50Hz |
TI – 62 HTC | 5.5 | 20 × 20 × 30 | 3 ph, N, 440V, 50Hz |
TI – 62 HTD | 10.7 | 22.5 × 22.5 × 45 | 3 ph, N, 440V, 50Hz |
Application
Split Tube Furnace is designed for R&D labs, Educational institutions, Medicine and Industry, Chemical Industries, Ceramics Industry, Biomedical Industry, Pharma Industry, Thermal Process Technology, Advanced Materials for following applications- Purification, Coating, Drying, Hardening or Ageing of samples, Annealing, Brazing, Calcination, Degassing, Sintering, Tempering, Thermocouple calibration, Testing of fuel cells, Catalyst research, Inorganic and Organic purification, Coating etc.